12 Tags of 2013 March

I have been a bit slack lately in doing the 12 tags, but this month I decided to give it a go even though I don't have most of the supplies Tim used lol. All good improvisation is my thing ;) First up I don't have the rabbit so I used my movers and shapers butterflies in the ornamental die from some DCWV paper. Then I edged it in some Frayed Burlap distress ink. Next instead of the sheet of tape I just laid strips of regular tape across my cs. I didn't have tinsel so I used wool for that soft fluffy feel. I learnt after covering the first butterfly to only take one strip of tape backing off at a time to keep it nice and sticky!

I don't have the tapered fringe die, but I do have the Martha Stewart Fringe Scissors so I grabbed some green Craft Core and got chopping. Then I sanded with my sanding block and added some frayed burlap. I made two layers this way.

From the same DCWV stack I grabbed a piece of paper to use as y background, as I had used a busy one around the butterflies I opted for one with a minimal pattern. The paper was no where near the colour I wanted so I added loads of ink around the edges. I started with Tumbled Glass followed by Broken China, Chipped Sapphire and finally Frayed Burlap for the grungy look.

Next I added some crinkle ribbon my sister got me as a present. It was pre-coloured so I just added some frayed burlap over the blue to tone it down a little. I tied the ribbon on and added that layer to the base with foam tape anywhere I could fit it around the woolly pieces and then added my "grass."

I don't have the metal foliage pieces so as I was doing a larger format than a tag I thought I would use a drink can (soda can) and cut it with the movers and shapers florals. I wasn't happy  with the size of one of the flowers so I cut some smallest ones from the tattered florals die. I used my fingers to shape each petal. For the smaller one I cut a small slit in between each petal first.

I don't have the new paints yet but they are so on my want list, right at the top! I used the Adirondack Dabbers instead. For the largest flower I used a combination of Pool, Aqua and Clover, the middle is Sunset Orange with white and the brad is Sunshine Yellow (I am in the middle of an argument with the yellow as it was almost solid!). 

For this flower I used a combination of Pink Sherbet and Aqua. and then the middle is the same as before. To turn the flowers into pins I added 2" pins to the back with glossy accents. I laid the pointy ends on a foam blending pad as a pillow to keep the pins in the right spot while they dried.

I cut the banner free hand as again I don't have the die. I stamped a flourish from Stampers Anonymous on the banner with tumbled glass. I then took my blending tool and used colours over the banner in the same order I did the outside piece. I stamped a sentiment from Mpress and then added some foam tape behind the middle part and double sided tape at the ends and stuck it at the top of my panel.

I then mounted the whole lot on a white card base the same size as the panel. I didn't want the card base to show so when I cut my panel I made it card front size (saves having to decide what colour card will be showing around the edges lol). Anyway that's my take on this months challenge, I hope you liked it :)

Happy Scrappin'

Purple

I am entering this at the following challenges;

Simon Says Stamp - Anything Goes

Joyful Stamper - Anything Goes

Tim Holtz - 12 Tags of 2013

Eclectic Ellapu - Child 

613 Avenue - Bingo - Brads/Free/Ribbon

Challenges 4 Everybody - Anything Goes

Make It Monday - Anything Goes

A day with no direction....

I go to my friends house on a tuesday to do some creating, this week I was hoping my simon order would be here so I could take my new stash to play with... Alas it didn't arrive in time, so I chucked a bunch of random stuff in my trolley and off I went.

The random stuff included Distress Stains, Faber Castell Big Brush and Artist Markers, Distress Ink Pads, a bunch of stamps, whhite cardstock and a few things I wanted to use to make cards with.

My list of products I wanted to use were

1. Backgrounds made during Creative Chemistry 101 (I have a container full)
2. Washi or Tissue Tape
3. Stickers I bought from Lincraft in Sydney
4. A flower I made using the bleeding technique
5. My new Cuttlebug Cut and Emboss Folder
6. White Embossing Powder

I managed to use 5/6 in the time I had :) So considering I hadn't created much lately I was pretty happy with that. I made three cards, none of which have their sentiments yet as I haven't decided what to use lol...

Card one is made using a background from Creative Chem, a rocket ship from the Hot Rockets stampendous stamp set, pit artist pens, stazon, distress stains and the cut and emboss labels folder from cuttlebug.

I used a background from class and ran it through my bug with the ornamental Tim Holtz die and mounted it on a white card base. I ran some more white cs through the cuttlebug inside the labels die. While the cs was still in the die I flipped it over and inked the embossed areas with a makeup sponge to get the nice intense colours. The rocket is stamped with black stazon and coloured with pitt artist markers and bb markers and then fussy cut. Both the rocket and the label are adhered with foam tape to add dimension.

I am thinking a Ribbon banner or two to add the sentiments and finish off my card :)

Card two uses another background from Creative Chem, symphony tissue tape, distress inks and a mini movers and shapers label die.

I coloured the symphony tissue tape with seedless preserves and then adhered it to the edges of my background. I took a flower I had coloured with seedless preserves and stuck it down with glossy accents. I am debating adding some brown leaves to the flower... I cut a label with the mini movers and shapers and inked the edges with my distress tool and more seedless.

The last one is my favourite of the three I think and uses another creative Chem background, yay 3 for 3... lol. I used Vellum, a sticker, I am Roses, and pitt artist pens.

I cut a plain piece of vellum with the ornamental die and adhered my outline sticker to the middle. I used my artist markers to colour the image in and a tissue to remove the ink from the sticker. I then stamped flourishes around the edges with the same blue marker I used in the image. I coloured some roses with the same two colours I used in the flower images and sprayed them with shimmer spray to add some sparkle. I glued the flowers down with glossy and added some twizzles.

There is a smidge of tape showing in the top left corner but thats where I will adhere my sentiment to hide it...

So while I didn't power create I did manage to make three nice cards :) and guess what!!!! My order came on Wednesday. I got a lil of this and a lil of that to add to my collection, a few stickles, a couple of distress pads I didn't have and some paints etc. But the thing I was most excited about was my Valentines day present!!! Finally I have the complete set of Gelatos in my hot little hand... Guess you know what my next blog post will be about!
Happy Scrappin'
Purple

Bright Cheerful Mothers Day Card

Hiya :)


My Distress Markers are here!!! So to celebrate I knocked up a card :) It turned into a lovely mothers day card.

I started with vellum, I stamped it with sunflower yellow Stazon with a stamp from the urban chic set, I then ran it through the bug using the Tim Holtz Ornamental Movers and Shapers Die. I used some silver butterfly stickers and stuck them on the vellum. I then used my Distress Markers in mustard seed, spiced marmalade, barn door and chipped sapphire to colour in the butterflies.

The sentiment is from inkadinkado stamped onto yellow cs and then cut with an oval lifestyle crafts die. I used my distress tool and distressed the edges first in spiced marmalade, then in barn door. While the distressing was sttill wet I went around the edge with perfect pearls in perfect pearl. I used foam tape to pop the oval off the card. To adhere the vellum down I hid tape behind the butterflys, sentiment and roses.

The roses are resin roses I got in a bag of 100 from ebay. I covered them in perfect medium and then added some perfect pearls over the top with perfect pearl. I glued them on with glossy accents. I chose a white cs card base and used my Distress marker in chipped sapphire to give a grungy boarder as I don't yet have that in a stamp pad.
Hope you like my first Mothers Day Card :)
Happy Scrappin'
Purple